Home Appliances
Please contact Bosch Customer Support at 1-800-944-2904 if your error code is not listed below as it may require technician assistance.
1. Disconnect the appliance from the power supply for 30 seconds by briefly switching off the circuit breaker in the fuse box.
2. Touch any control on the cooktop within the next three minutes.
1. Switch the appliance off and on again.
- If the fault/error was a one-off occurrence, the message will disappear.
- If the message appears again, call Bosch Customer Support at 1-800-944-2904 and specify the exact error code when calling.
Contact your electrical utility provider or contact Bosch Customer Support at 1-800-944-2904 for assistance.
1. Wait until the electronics have cooled down sufficiently.
2. Switch the cooking zone back on and you can continue to cook.
1. Wait until the electronics have cooled down sufficiently.
2. Touch any control element on the cooktop.
3. When the error message disappears and the electronics have cooled down sufficiently, you can continue to cook.
Remove the cookware from the control panel and you can continue to cook.
1. Remove the cookware from the control panel.
2. Wait a few seconds.
3. Touch any control element on the cooktop.
4. When the error message disappears and the electronics have cooled down sufficiently, you can continue to cook.
1. Simply touch any control element on the cooktop.
2. You can set the cooking zone and continue to cook.
Contact your electrical utility provider or contact Bosch Customer Support at 1-800-944-2904 for assistance.
"1. Disconnect the appliance from the power supply for 30 seconds by switching off the circuit breaker or fuse in the electrical panel.
2. Touch any control element on the cooktop within the next 3 minutes."
1. Switch the appliance off and on again.
- If the fault/error was a one-off occurrence, the message will disappear.
- If the message appears again, call Bosch Customer Support at 1-800-944-2904 and specify the exact error code when calling.
1. Wait until the electronics have cooled down sufficiently.
2. Touch any control element on the cooktop.
3. When the error message disappears and the electronics have cooled down sufficiently, you can continue to cook.
1. Wait until the electronics have cooled down sufficiently.
2. Touch any control element on the cooktop.
3. When the error message disappears and the electronics have cooled down sufficiently, you can continue to cook.
Remove the cookware from the control panel and you can continue to cook.
1. Remove the cookware from the control panel.
2. Wait a few seconds.
3. Touch any control element on the cooktop.
4. When the error message disappears and the electronics have cooled down sufficiently, you can continue to cook.
1. Touch any control element on the cooktop.
2. You can set the cooking zone and continue to cook.
Contact your electrical utility provider or contact Bosch Customer Support at 1-800-944-2904 for assistance.
1. Disconnect the appliance from the power supply.
2. Wait a couple of seconds and reconnect the appliance to the power supply.
3. If the message persists, call Bosch Customer Support at 1-800-944-2904 for assistance.
Turn all burners off or use the minimum power level until the electronic system has cooled down sufficiently.
Reset power to breaker for 30 seconds. If not resolved, call Bosch Customer Support at 1-800-944-2904 for assistance.
Reset power to breaker for 30 seconds. If not resolved, call Bosch Customer Support at 1-800-944-2904 for assistance.
Reset power to breaker for 30 seconds. If not resolved, call Bosch Customer Support at 1-800-944-2904 for assistance.
Contact Bosch Customer Support at 1-800-944-2904 for assistance.
Reset power to breaker for 30 seconds. If not resolved, call Bosch Customer Support at 1-800-944-2904 for assistance.
Reset power to breaker for 30 seconds. If not resolved, call Bosch Customer Support at 1-800-944-2904 for assistance.
Reset power to breaker for 30 seconds. If not resolved, call Bosch Customer Support at 1-800-944-2904 for assistance.
Reset power to breaker for 30 seconds. If not resolved, call Bosch Customer Support at 1-800-944-2904 for assistance.
Reset power to breaker for 30 seconds. If not resolved, call Bosch Customer Support at 1-800-944-2904 for assistance.
The dishwasher needs to be descaled. The Bosch descaler can be used to descale your dishwasher.
Dishwashers are used on a regular basis which means that limescale can build up quickly, especially in hard water areas. To help your dishwasher work efficiently and effectively, and to ensure your dishes come out clean, regular descaling is important.
To help avoid this issue in the future, use softening salt in your dishwasher if it comes with a water softener function.
Purchase the Bosch descaler here and purchase softening salt here.
Contact Bosch Customer Support at 1-800-944-2904 for assistance.
Please turn off the water inflow and contact Bosch Customer Support at 1-800-944-2904 for assistance.
Check the inlet hose and make sure it isn't kinked or damaged. For further assistance on how to troubleshoot your dishwasher, contact Bosch Customer Support at 1-800-944-2904.
1. Check the inlet hose and make sure it isn't kinked or damaged.
2. Make sure the water supply is turned on. The water flow rate should be 10 l/min.
For further assistance, please contact Bosch Customer Support at 1-800-944-2904.
Reset power to breaker for 30 seconds. If not resolved, call Bosch Customer Support at 1-800-944-2904 for assistance.
Reset power to breaker for 30 seconds. If not resolved, call Bosch Customer Support at 1-800-944-2904 for assistance.
Reset power to breaker for 30 seconds. If not resolved, call Bosch Customer Support at 1-800-944-2904 for assistance.
Remove and wash the filter under running water with mild soap and a soft brush to remove debris then reinstall. You can find the full instructions on how to clean your dishwasher filter here. To learn more, view our 'How to Clean Your Dishwasher Filter' video on our How-to Video page
Contact Bosch Customer Support at 1-800-944-2904 for assistance.
1. Check the inlet hose and ensure it's not kinked or damaged.
2. The pump cover may be loose. The pump cover is located at the bottom of the dishwasher underneath the filter. Remove the filter to reveal the pump cover and ensure that it’s not loose. If you have trouble locating it, review your owner's manual.
3. If the dishwasher drain hose is connected to a garbage disposal's dishwasher drain connection, ensure that the plug is removed from the disposer’s dishwasher drain connection.
1. Check to see if the drain pump cover is loose. The pump cover is located at the bottom of the dishwasher underneath the filter. Remove the filter to reveal the pump cover and ensure that it’s not loose. If you have trouble locating it, review your owner’s manual.
2. The drain pump may be blocked. The pump is located at the bottom of the dishwasher underneath the filter. First, remove the filter completely to reveal the drain pump cover. Next, pry off the pump cover with a spoon until it clicks. Grip the cover and pull upward until you feel resistance. Then pull forward to remove the cover completely. Check the pump and remove any debris and standing water with a sponge. Use caution as some debris may be sharp. If needed, review your owner's manual for more specific instructions.
Reset power to breaker for 30 seconds.If the error occurs again, contact an electrician to check incoming voltage to the appliance.
Reset power to breaker for 30 seconds. If not resolved, call Bosch Customer Support at 1-800-944-2904 for assistance.
Reset power to breaker for 30 seconds. If not resolved, call Bosch Customer Support at 1-800-944-2904 for assistance.
Contact Bosch Customer Support at 1-800-944-2904 for assistance.
Reset power to breaker for 30 seconds. If not resolved, call Bosch Customer Support at 1-800-944-2904 for assistance.
Reset power to breaker for 30 seconds. If not resolved, call Bosch Customer Support at 1-800-944-2904 for assistance.
Contact Bosch Customer Support at 1-800-944-2904 for assistance.
Reset power to breaker for 30 seconds. If not resolved, call Bosch Customer Support at 1-800-944-2904 for assistance.
The dishwasher needs to be descaled. The Bosch descaler can be used to descale your dishwasher.
Dishwashers are used on a regular basis which means that limescale can build up quickly, especially in hard water areas. To help your dishwasher work efficiently and effectively, and to ensure your dishes come out clean, regular descaling is important.
To help avoid this issue in the future, use softening salt in your dishwasher if it comes with a water softener function.
Purchase the Bosch descaler here and purchase softening salt here.
Reset power to breaker for 30 seconds. If not resolved, call Bosch Customer Support at 1-800-944-2904 for assistance.
Reset power to breaker for 30 seconds. If not resolved, call Bosch Customer Support at 1-800-944-2904 for assistance.
Contact Bosch Customer Support at 1-800-944-2904 for assistance.
Please turn off the water inflow and contact Bosch Customer Support at 1-800-944-2904 for assistance.
1. Check the inlet hose and make sure it isn't kinked or damaged.
2. Make sure the water supply is turned on. The water flow rate should be 10 l/min.
For further assistance, please contact Bosch Customer Support at 1-800-944-2904.
Check the inlet hose and make sure it isn't kinked or damaged. For further assistance on how to troubleshoot your dishwasher, contact Bosch Customer Support at 1-800-944-2904.
Reset power to breaker for 30 seconds. If not resolved, call Bosch Customer Support at 1-800-944-2904 for assistance.
Reset power to breaker for 30 seconds. If not resolved, call Bosch Customer Support at 1-800-944-2904 for assistance.
Contact Bosch Customer Support at 1-800-944-2904 for assistance.
1. Check to see if the drain pump cover is loose. The pump cover is located at the bottom of the dishwasher underneath the filter. Remove the filter to reveal the pump cover and ensure that it’s not loose. If you have trouble locating it, review your owner’s manual.
2. The drain pump may be blocked. The pump is located at the bottom of the dishwasher underneath the filter. First, remove the filter completely to reveal the drain pump cover. Next, pry off the pump cover with a spoon until it clicks. Grip the cover and pull upward until you feel resistance. Then pull forward to remove the cover completely. Check the pump and remove any debris and standing water with a sponge. Use caution as some debris may be sharp. If needed, review your owner's manual for more specific instructions.
1. Check the inlet hose and ensure it's not kinked or damaged.
2. The pump cover may be loose. The pump cover is located at the bottom of the dishwasher underneath the filter. Remove the filter to reveal the pump cover and ensure that it’s not loose. If you have trouble locating it, review your owner's manual.
3. If the dishwasher drain hose is connected to a garbage disposal's dishwasher drain connection, ensure that the plug is removed from the disposer’s dishwasher drain connection.
Contact Bosch Customer Support at 1-800-944-2904 for assistance.
Reset power to breaker for 30 seconds. If not resolved, call Bosch Customer Support at 1-800-944-2904 for assistance.
Reset power to breaker for 30 seconds. If not resolved, call Bosch Customer Support at 1-800-944-2904 for assistance.
Reset power to breaker for 30 seconds.If the error occurs again, contact an electrician to check incoming voltage to the appliance.
Remove and wash the filter under running water with mild soap and a soft brush to remove debris then reinstall.
You can find the full instructions on how to clean your dishwasher filter here.
To learn more, view our 'How to Clean Your Dishwasher Filter' video on our How-to Video page
1. Disconnect the appliance from the power supply for 30 seconds by switching off the circuit breaker or fuse in the electrical panel.
2. Touch any control on the appliance within the next 3 minutes.
1. Press any button to stop the beeping.
2. Reset the oven if necessary.
3. Call Bosch Customer Support at 1-800-944-2904 for assistance or to book a service visit.
Contact your electrical utility provider or contact Bosch Customer Support at 1-800-944-2904 for assistance.
1. Disconnect the appliance from the power supply.
2. Make sure the appliance has been connected as shown in the circuit diagram.
1. Wait until the electronics have cooled down sufficiently.
2. Switch the cooking zone back on and you can continue to cook.
1. Wait until the electronics have cooled down sufficiently.
2. Touch any control element on the appliance.
3. When the error message disappears and the electronics have cooled down sufficiently, you can continue to cook.
Remove the cookware from the control panel and you can continue to cook.
1. Remove the cookware from the control panel.
2. Wait a few seconds.
3. Touch any control element on the appliance.
4. When the error message disappears and the electronics have cooled down sufficiently, you can continue to cook.
1. Simply touch any control element on the cooktop.
2. You can set the cooking zone and continue to cook.
Contact your electrical utility provider or contact Bosch Customer Support at 1-800-944-2904 for assistance.
1. Press any button to stop the beeping.
2. Reset the oven if necessary.
3. Call Bosch Customer Support at 1-800-944-2904 for assistance or to book a service visit.
1. Press any button to stop the beeping.
2. Reset the oven if necessary.
3. Call Bosch Customer Support at 1-800-944-2904 for assistance or to book a service visit.
1. Disconnect the appliance from the power supply.
2. Wait a couple of seconds and reconnect the appliance to the power supply.
3. If the message persists, call Bosch Customer Support at 1-800-944-2904 for assistance.
1. Clean the control panel with a dry cloth.
2. Disconnect the appliance from the power supply by switching off the fuse in the fuse box and switch it back on after 10 seconds.
Disconnect the appliance from the power supply by switching off the fuse in the fuse box and call Bosch Customer Support at 1-800-944-2904 for assistance or to book a service visit.
1. Press any button to stop beeping.
2. Reset oven if necessary.
3. If the error code continues to show up, turn off the oven and call Bosch Customer Support at 1-800-944-2904 for assistance with the error code or to book a service visit.
Reset power to breaker for 30 seconds. If not resolved, call Bosch Customer Support at 1-800-944-2904 for assistance.
Reset power to breaker for 30 seconds. If not resolved, call Bosch Customer Support at 1-800-944-2904 for assistance.
Please review your owner's manual to learn how to deactivate the child lock for your washer. To download a copy of your manual, click here.
Clean the washer drain hose and/or the drain pipe. You may also need to perform pump maintenance to clear the blockage (see your owner's manual to learn how to do this). Click here to find your owner's manual.
Turn off the water tap and call Bosch Customer Support at 1-800-944-2904 for assistance.
Close the door properly (clicks audibly). In particular, a full load may prevent the door from closing properly. Check whether there is something jammed between the door and housing. Restart the program.
1. Clean the filters in the water supply hose. Attention: The AquaStop safety device contains an electric valve so do not immerse in water. Instructions: 1. Turn the tap off. 2. Take the hose off the tap. 3. Clean the filters using a small brush. 4. For appliances without an AquaStop, remove the hose from the back of the appliance. Take out the filter with pliers and clean it. 5. Reconnect the hose and check for leaks.
2. Fully turn on the tap and approximately 2.5 gallons (10 liters) of water per minute must flow out of the fully open tap. Contact your plumber if the water pressure is too low.
1. Clean the filters in the water supply hose. Attention: The leaking water may be very hot with a risk of scalding. Set program to OFF. Pull out the main plug. Check whether the drainage hose has been installed without kinks. Loosen the hose clip on the siphon and carefully remove drainage hose and any residual water. Clean drainage hose and siphon spigot. Hold drainage hose in a bucket and select the DRAIN program. Connect drainage hose to the siphon and check for leaks.
2.Clean the pump. Attention: The leaking water may be very hot with a risk of scalding. Set program to OFF. Pull out the main plug. Open and remove service flap. Drain any water through the drainage hose by slowly removing the pump cover. Clean the interior, pump cover thread and pump housing. The impeller wheel of the pump must be able to turn. Re-insert the pump cover and screw on firmly. To check for leaks, pour 1 quart (1 liter) of water into the detergent dispenser. Check for leaks and then start the DRAIN program.
Please wash large and small items together to reduce the imbalance. Make sure to close zippers and buttons on pillows and duvet covers.
Reduce the amount of detergent. In particular, when washing slightly soiled laundry, the amount of detergent should be reduced. Information on the amount of detergent to use can be found on the detergent packaging.
Faults can only be eliminated by an authorized technician. Contact Bosch Customer Support at 1-800-944-2904 for assistance.
This error code could be caused by a number of issues - please check the following:
The hot water tap is not turned on.
Confirm hot water hose is correctly connected and turn on the hot water tap.
The supply hose for hot water is kinked or pinched closed.
Eliminate the kink or blockage. Replace the hose if damaged.
The hot water pressure is too low.
Check the hot water pressure and fix if needed.
The strainer in the water supply hose is clogged.
Clean out the strainers in the supply hose.
Clean the lint filter after each drying cycle. Occasionally rinse out the lint and fluff filter with warm water.
This fault can only be eliminated by an authorized technician. Contact Bosch Customer Support at 1-800-944-2904 for assistance.
This fault can only be eliminated by an authorized technician. Contact Bosch Customer Support at 1-800-944-2904 for assistance.
For Home Connect related error codes, please click here.
At Bosch, we continuously aim to improve our website and the information we provide. We would like to invite you to take part in an optional one minute survey.
If you wish to be contacted by us, please use our regular contact form here, contact Customer Support at (800) 944-2904, or chat online with a Customer Support representative. Thank you.
At Bosch, we continuously aim to improve our website and the information we provide. We could like to invite you to take part in an optional one minute survey.
If you wish to be contacted by us, please use our regular contact form here, contact Customer Support at (800) 944-2904, or chat online with a Customer Support representative. Thank you.