The Dishwasher Care product should be used on a regular basis (every 1-2 months) to remove grease and limescale. Every 4-6 months, the Maintenance Powder is used for a thorough, intensive clean to remove grease, starch and protein residues.
24" Bar Handle Dishwasher 500 Series- Stainless steel SHX45P05UC
Model Number (E-Nr): SHX45P05UC/59
Select a category below.
- Error code / error display / signal
- Result problem
Cleaning and Care
Clean the spray arms when needed. In general, spray arms will only be soiled and need to be cleaned if the filter is not functioning or has not been installed properly since this may result in debris being deposited on or inside the spray arms. To clean spray arms: 1. Unscrew the upper spray arm and then remove the lower spray arm. 2. Rinse both arms under water to loosen debris and clean the arms. You should use a cocktail stick to remove any pips from the holes. 3. Reinstall properly.
To clean a non-stainless steel exterior: Wipe the front of the appliance with a damp cloth. Do not use abrasive detergents or sponges with a rough surface. To clean a stainless steel exterior: Avoid using a sponge or abrasive detergents. Wipe with the grain when cleaning stainless steel. Use a mild, non-abrasive cleaning agent or stainless steel cleaner with a soft cloth. Wipe dry to avoid water marks. Do not use cleaning materials that contain chlorine since it is corrosive to stainless steel. Warning: Some stainless steel cleaners are known to have negative effects on materials other than stainless steel. Make sure to apply stainless steel cleaner to stainless steel components only! Tested and approved Stainless steel conditioning cloths and cleaner can be ordered from us. The cloths are food-safe and can be used on surfaces which are in contact with food.
For normal stainless steel surfaces, wash with mild, soapy water and a soft cloth. Dry thoroughly and use a stainless steel conditioner to condition the surface. Bosch Stainless Steel Conditioner (part # 00576696) can be purchased in the Bosch online accessories store. Do not use stainless steel conditioner on control labels, logos, or black stainless steel. For black stainless steel surfaces, DO NOT use any stainless steel cleaners or conditioners including the Bosch Stainless Steel Conditioner. Use of cleaners and conditioners over time may discolor the black stainless steel. Simply, wipe down the surface with mild, soapy water and a soft cloth and dry. Make sure to always wipe in the direction of the grain.
Clean the door seal with a damp cloth.
Dusting: Use the green cloth dry for dusting. The static will pick up the dust particles. Cleaning grease and dirt: Fold the green cloth and use damp to remove any grease and dirt. Glass cleaning and polishing: Lightly spray water on the blue cloth and wipe appliance with the cloth. Stainless steel: Wet the green cloth and wipe away any grease. Spray the surface with water and polish with the blue cloth. Always wipe in the direction of the grain. Always make sure your cloths are clean to avoid scratching surfaces. E-cloths (part # 00466148) can be purchased in the Bosch online accessories store.
We recommend descaling your dishwasher 1-3 times a year depending on usage or the amount of hard water you use. Bosch Descaler (part # 00311506) can be purchased from Customer Service or in the online accessories store.
1. Empty your dishwasher. Do not unscrew the cap, but remove the protective sticker on the top of the bottle. 2. Turn the bottle upside down and securely place into the cutlery basket. 3. If the dishwasher does not have a cutlery basket, place securely in the bottom rack – the sticker can be used to assist holding it more securely. 4. Choose a programme of at least 65°C (for example the normal programme or intensive) and let it run until completion.
1. Empty your dishwasher completely and remove any food residues from the filter area. Check the spray arms and clean if required. 2. Choose a program of at least 149°F (65°C) (for example the normal program or intensive) and start the machine. 3. After 30 minutes open the machine with caution and empty the contents of the pack into the cutlery basket or spread throughout the whole dishwasher. 4. Let the program run until the end.
1. Run the 140°F (60°C) program without detergent or dishes. 2. After 30 minutes, open the dishwasher with caution and pour the descaler into the dishwasher. 3. Run the program again for thorough cleaning.